Skip to content
Naggarco

Gemlik, Bursa

The factory.

Everything we deliver is made in one place: a 5,000 m² production floor in Gemlik, Bursa, running under our own production management. Nothing leaves the site between CNC and container, so a hotel program stays on one schedule and one purchase order.

01

Machining

CNC-machined carcasses and components, cut from certified board and solid wood, labelled to room number from the first operation.

02

Finishing

Veneer, lacquer and paint applied in our own spray booths: the finish schedule an operator approves is the finish that ships.

03

Upholstery

Frames, foam and fabric sewn and fitted in-house, built for nightly contract wear.

The upholstery bench, August 2026. Sound off.

The floor, station by station

Thirteen stops in the order the material moves: board stock to the saw, the CNC, drilling, assembly, upholstery, packing, and the container at the door. Photographed on the floor in August 2026.

The hall: The production hall from above: panel stacks on pallets, the long machines along the far wall.
01The hall The production hall from above: panel stacks on pallets, the long machines along the far wall.
Board stock: Panel stock inside the yard door, on pallets, waiting for the saw.
02Board stock Panel stock inside the yard door, on pallets, waiting for the saw.
To the saw: Boards move from the stack to the saw by forklift. The aisles are marked for it.
03To the saw Boards move from the stack to the saw by forklift. The aisles are marked for it.
Panel saw: Cutting to size on the sliding table saw, two operators to a sheet.
04Panel saw Cutting to size on the sliding table saw, two operators to a sheet.
CNC router: Carcass parts machined on the CNC router.
05CNC router Carcass parts machined on the CNC router.
Drilling: Hinge and dowel holes on the vertical boring machine; the drilled parts stack up beside it.
06Drilling Hinge and dowel holes on the vertical boring machine; the drilled parts stack up beside it.
Assembly: Carcass assembly: sides, shelves, backs and hardware, one unit at a time.
07Assembly Carcass assembly: sides, shelves, backs and hardware, one unit at a time.
A radiused panel: A curved panel at the assembly bench, trimmed by hand.
08A radiused panel A curved panel at the assembly bench, trimmed by hand.
Upholstery bay: The upholstery bay, with the cutting table and the quilted panels in progress.
09Upholstery bay The upholstery bay, with the cutting table and the quilted panels in progress.
Dry fit: A wall unit and its desk, assembled raw on the floor and checked before the finish goes on.
10Dry fit A wall unit and its desk, assembled raw on the floor and checked before the finish goes on.
Stores: Finished parts on the racking, the wrapping paper on the roll, waiting for their pallet.
11Stores Finished parts on the racking, the wrapping paper on the roll, waiting for their pallet.
Packing: Every part wrapped in corrugated board at the packing bench before it is palletised.
12Packing Every part wrapped in corrugated board at the packing bench before it is palletised.
Container: Loading: packed bundles go from the forklift into the container at the door.
13Container Loading: packed bundles go from the forklift into the container at the door.

The factory in figures

5,000 m²
production floor
350 m²
showroom
8
model rooms
30 min
to Gemlik port
5
international hotel flags delivered
1
purchase order, factory to floor

Eight rooms you can walk through

Eight model rooms in our showroom: guestrooms and living spaces you can open and sit in. The Marriott, Hilton, Mövenpick, Rotana and Ascott programs all started in rooms like these.

Book a factory visit

Certifications

Certificates follow the specification. Fire performance is certified against the actual build-up — the foam and the fabric named in your brief — and panel emission class against the board specified, so the documents are issued per project rather than held as one generic pack. Available on request.

Request certificates for your spec

Factory or trading company: the whole test, answered